SAE Standard Data File

#SAE Standard Data File #
Pick one: #FDE_plot #FDE_fit # #

# Stainless  17-4PH steel NOTE!!:  Load control R=0.1
# NOTE!! Use Sequiv.= sqrt(Sampl. * Smax ) converted to R=-1
# Condition: As received: 0.5hr@1038C air cool
# Chem.: 15.2%Cr 4.47Ni 3.47Cu .65Mn .38Si 0.2Nb_Ti
# Chem.: 0.15Mo .03S .02C .016P
# Spec.: axial 6mm diam, 18mm long gauge length.
# Ref.: J-H Wu, C-K Lin, "Tensile and Fatigue Properties of
# Ref.: 17-4PH Stainless Steel at High Temperatures",
# Metallurgical and Matl. Trans. A, V33A June 2022 pp1715-1724
# The paper also shows data for 200C, 300C and 400C with not
# much diff. except for 400C.

#FileType= strain_life
#DataType= raw
#TIMEcol= 0
#NAME=  17-4PH_AsReceived
#Name= StainlessSteel
#Stress_units= mpa
#Strain_units= strain

#Room Temp. props:
#Sy= 992 mpa
#Su= 1018
#E= 199000
#%Elongation= 13.4 over 25mm
#BHN= 301  HRc=32
#Impact= 67 J  Vnotched

#Note!! Convert to R=-1      Seq=1.491Sa         
#Note!! Assume elastic for StrainEquiv. too.
#StrEquivAmp 2Nf SeqivAmpl. So PlsStrAmpl Emod
0.00226  155560   670      0     0   199000   
0.00215  371600   637      0     0   199000   
0.00215  472200   638      0     0   199000   
0.00212  862000   630      0     0   199000   
0.00209 4032800   620      0     0   199000   #runout

#Raw Data from R=0.1 load control test
#Nf    StsAmpl.
#77780   450
#185800   427
#236100   428
#431000   422
#2016400   416

#
#