# pdStressStrain.f vers. 1.0 #Usage: pdStressStrain emScale ebScale outfile #emMag= 1.0000000 #ebMag= 1.0000000 #Opening pdss.env file... # This file contains the starting filenames, variables etc # for the pdStressStrain.f programs. # I'm debating placing this stuff in the mainline. -but perhaps there # are future considerations for keeping this. # # Mostly, right now, it would be used to globally scale the strains # using the MAGFACTORs and the MEANADDs. # Although each run of pdStressStrain also includes mag. factors. # Other critical items, such as MATERIAL file is read from the # segment's strain log file. #found: #TYPE= CoiledTube # # Adjustments to load file variables: # # Note that the MEANADD (below) is added AFTER the MAGFACTOR is applied. #found: #MAGFACTOR_m= 0.1000000E+01 #found: #MAGFACTOR_b= 0.1000000E+01 #found: #MEANADD_m= 0.0000000E+00 #found: #MEANADD_b= 0.0000000E+00 #found: #MAXREPS= 1 # # One repetition or application of the load history is # # also called a "block" of cycles. # #found: #SAVELEVEL= 2 # # 3=lots 2=medium 1=minimal # # Use for large output files with lots of cycles. # Getting Strain history file from std.input #ID= XYZ5134 #MATERIAL= merged3_SAE950X_fitted.html #SEGMENT= 1030 #history.adj 0.000 0.00000 0.00000 0.00000 0.0 -1030.0 102. 72. 101. 73. #history.adj 598.000 0.00000 0.00000 0.00000 0.0 -1030.0 102. 72. 101. 73. #history.adj 601.000 0.00000 0.00800 0.00800 0.0 -1030.0 102. 72. 101. 73. #history.adj 999.000 0.00000 0.00800 0.00800 0.0 -1030.0 102. 72. 101. 73. #history.adj 1000.100 0.00000 0.00800 0.00800 70.0 -1030.0 102. 72. 101. 73. #history.adj 1298.000 0.00000 0.00800 0.00800 70.0 -1030.0 102. 72. 101. 73. #history.adj 1300.020 0.00000 0.00800 0.00800 0.0 -1030.0 102. 72. 101. 73. #history.adj 1598.000 0.00000 0.00800 0.00800 0.0 -1030.0 102. 72. 101. 73. #history.adj 1598.116 0.00000 0.00795 0.00795 0.0 -1030.0 102. 72. 101. 73. #an insert #history.adj 1600.320 0.00100 0.00800 0.00900 0.0 -1030.0 102. 72. 101. 73. #history.adj 2048.000 0.00100 0.00000 0.00100 0.0 -1030.0 102. 72. 101. 73. #history.adj 2050.000 0.00100 0.00000 0.00100 0.0 10.0 102. 72. 101. 73. #history.adj 2054.500 0.00100 0.00000 0.00100 0.0 54.5 102. 72. 101. 73. #history.adj 2055.070 0.00100 0.01000 0.01100 0.0 55.0 102. 72. 101. 73. #history.adj 2061.500 0.00100 0.01000 0.01100 0.0 71.5 102. 72. 101. 73. #history.adj 2062.190 0.00100 0.00000 0.00100 0.0 72.0 102. 72. 101. 73. #history #Data input completed. nloads= 16 #history #etotMax= 0.01100 #history #etotMin= 0.00000 #history #Where etot = emembrane + ebending #version= 1.0 readStrainLifeStress.f starts... #SAE Standard Fatigue Data File format #
#
Pick one: #FDE_plot #FDE_fit # #